Cryogenics
The cryogenic industry requires uniform wall thickness, unblemished
surface finish, and multi-level material certification. Geometric
consistency part-to-part and run-to-run is mandatory. HMS
has mastered the unique requirements of this industry. Below
are examples of parts HMS forms for the cryogenic industry.
Leg
This aluminum part is a component of a liquid oxygen system.
The Leg is an unusual piece due to its angled cut-off and
unique hole shapes.
 |
|
|
|
| |
|
| Diameter |
6.00" |
|
| Height |
5.00" |
|
| Material |
Aluminum |
|
| Thickness |
0.125" |
|
| Finish |
Brushed |
|
|
|
|
|
Outer Heads
These aluminum parts are Outer Heads for cryogenic containers.
These parts require consistent wall thickness throughout.
A smooth surface finish provides an excellent base for high
gloss metallic paint.
|
|
|
|
| |
|
| Diameter |
18.36" |
7.25" |
|
| Height |
12.45" |
6.98" |
|
| Material |
Aluminum |
Aluminum |
|
| Thickness |
0.125" |
0.125" |
|
| Finish |
Mill |
Mill |
|
|
|
|
|
Tank Heads
Both of these Tank Heads are used in the cryogenic
industry. These stainless steel parts must be free from scratches
and consistent in diameter.
|
|
|
|
| |
|
| |
|
|
| Diameter |
16.00" |
3.40" |
| Height |
04.60" |
1.03" |
| Material |
Stainless |
Stainless |
| Thickness |
0.060" |
0.018" |
| Finish |
Mill |
Mill |
|
|
|
|
Bases
These aluminum cans are Bases for cryogenic tanks.
The combination of spinning and drawing is the most cost effective
approach to these parts.
|
|
|
|
| |
 |
| Diameter |
18.52" |
7.41" |
11.18" |
| Height |
12.55" |
9.06" |
11.65" |
| Material |
Alum-
inum |
Alum-
inum |
Alum-
inum |
| Thickness |
0.125" |
0.125" |
0.125" |
| Finish |
Mill |
Mill |
Mill |
|
|
|
| |
|
