Custom
Many formed parts are combinations of Cans, Cones, Domes,
etc. Below are examples of custom parts we have formed.
Dog Bowl
This aluminum Dog Bowl was designed to hold water even
when tipped over. The patented inner rim addresses this design
goal. The finished product is anodized in various colors.
 |
|
|
|
| |
| |
| |
|
|
| Diameter |
12.250" |
|
| Height |
03.500" |
|
| Material |
Aluminum |
|
| Thickness |
0.063" |
|
| Finish |
Brushed |
|
|
|
|
|
Rotor
This anodized aluminum part is a component of a centrifuge.
The unique features of this part are the angle of the holes
and the staked center hub.
|
|
|
|
| |
| |
| Diameter |
4.500" |
|
|
| Height |
2.000" |
|
|
| Material |
Aluminum |
|
|
| Thickness |
0.100" |
|
|
| Finish |
Anodize |
|
|
|
|
|
|
Rod Holder
This part is formed from aluminum tubing. One end is flared
while the other end is tapered. Secondary operations include
polishing and hole piercing. This Rod Holder is used in the
marine industry.
|
|
|
|
| |
| |
| Diameter |
02.250" |
|
| Height |
10.250" |
|
| Material |
Aluminum |
|
| Thickness |
0.125" |
|
| Finish |
Mill |
|
|
|
|
|
Leg
This aluminum part is a component of a liquid oxygen system.
The Leg is an unusual piece due to its angled cut-off and
unique hole shapes.
|
|
|
|
| |
| |
| Diameter |
6.000" |
|
| Height |
5.000" |
|
| Material |
Aluminum |
|
| Thickness |
0.125" |
|
| Finish |
Brushed |
|
|
|
|
|
Cover
This aluminum part is a shroud for a small turbine engine.
This shape is commonly referred to as a "donut".
Spinning is an excellent manufacturing process for this type
of shape.
|
|
|
|
| |
| |
| Diameter |
4.267" |
|
| Height |
1.300" |
|
| Material |
Aluminum |
|
| Thickness |
0.040" |
|
| Finish |
Brushed |
|
|
|
|
|
Spitoon
This brass spitoon is created by joining three separate spinnings.
The final combination is an attractive part due to geometry,
material and finish.
|
|
|
|
| |
| |
| Diameter |
8.500" |
|
| Height |
6.000" |
|
| Material |
Brass |
|
| Thickness |
0.064" |
|
| Finish |
Polished |
|
|
|
|
|
Kettle
This hourglass-shaped Kettle is used in the food service industry.
This type of shape is called a re-entrant contour because
of the narrow waist. The metal spinning process is typically
the most cost effective forming solution for this type of
contour.
|
|
|
|
| |
| |
| Diameter |
13.500" |
|
| Height |
11.000" |
|
| Material |
Aluminum |
|
| Thickness |
0.080" |
|
| Finish |
Brushed |
|
|
|
|
|
Mounting Rings
This set of aluminum parts is used in the sky light industry
on the exterior of the building. The Rings can accommodate
various roof pitches while still providing a horizontal mounting
surface.
|
|
|
|
| |
| |
| Diameter |
16.00" |
11.00" |
| Height |
05.00" |
04.50" |
| Material |
Aluminum |
Aluminum |
| Thickness |
0.063" |
0.063" |
| Finish |
Mill |
Mill |
|
|
|
| |
|
